Products
-
1.000 JD
-
Bison 3 Gryphon Spatulas (7005120)
Griffon Multi Nozzle® – is a professional nozzle equipped with 4 outlets that can be opened as needed, with a side guiding probe to ensure accuracy. It is specially designed to facilitate the application of mounting adhesive on large areas and long surfaces with high efficiency and optimal distribution. Key Features: Ability to customize the number and openings of outlets based on project requirements. Precise geometric distribution: 20 mm distance between openings to ensure even coverage. Side guiding probe allows for precise adhesive application along edges. Total width up to 80 mm, which speeds up the application process on wide surfaces. Compatible with all standard S15 threaded cartridges. Ensures an "optimal dose," reducing material waste. Technical Specifications: Product Name: Griffon Multi Nozzle. Product Number: 7005120. Color: Black. Function: Applies up to 4 parallel adhesive lines simultaneously. Applications and Uses: Ideal for: Installing large wall panels, wide floor edgings, and long finishing strips. Efficiency: Increases work speed in projects requiring large quantities of regularly distributed adhesive. Usage Tip: Use a sharp knife to open only the desired outlets. Start by pressing the cartridge until the adhesive flows evenly from all open outlets, then begin sweeping across the surface using the guiding probe to maintain the distance from the edge.
17.000 JD
-
WORKPRO Cross head screwdriver 10 cm, 10 pcs, by WorkPro (WP408130)
The WORKPRO Magnetic Impact Torsion Bit – Model WP408130 – is the advanced generation of screwdriver bits specifically designed to handle the extreme torque of impact drivers. It features "Torsion Zone" technology that absorbs impact energy, preventing bit breakage and extending its lifespan remarkably compared to ordinary bits. Professional Features and Benefits: Torsion Technology: The middle section of the bit is designed to twist slightly when torque peaks, reducing stress on the bit tip and preventing breakage or cam-out from the screw. Strong Magnetism and High Stability: The bit is equipped with excellent magnetic properties that help securely hold screws, allowing for easy one-handed operation, especially in elevated or tight spaces. Precise PH2 Design: The tip is manufactured with extreme precision to fit the most common Phillips #2 screws, ensuring a perfect fit and reducing cam-out. Extra Length (100mm): The extra length (100mm) provides superior access to deep screws or those located behind obstacles, and offers a clearer view of the fastening location. Impact-Specific Steel: Made from high-quality alloy steel and heat-treated to withstand the repeated impacts of powerful cordless tools. Legal Information and Specifications (WP408130): Product Name: WorkPro Magnetic Impact Torsion Bit. Model Number: WP408130. Bit Type: PH2 (Phillips). Length: 100mm. Country of Origin: China. Manufacturer: GREATSTAR. Special Features: Impact-resistant, magnetic, torque absorption zone. Why choose this model (100mm
9.000 JD
-
1.000 JD
-
Crown Crown Router 1100W | CT11002
Description:The Crown CT11002 Plunge Router is a versatile tool designed for precise woodworking tasks, including carving, grooving, and shaping materials. Key Features: Variable speed control for optimal performance on various materials. Soft start to prevent sudden jolts upon activation. Constant speed control system to maintain consistent performance under load. Plunge depth control system for precise results. Integrated dust extraction system to keep the workspace clean. Specifications: Power Input: 1400 W No-load Speed: 9000-28000 rpm Collet Diameter: 12 mm Plunge Depth: Up to 50 mm Weight: 4.2 kg Dimensions: 20.6 × 30.2 × 31.2 cm Voltage: 220-230 V Amperage: 6 Amps Material: Metal Color Options: Multi-color Power Source: Corded Electric
80.000 JD
-
WORKPRO Router 6 mm from Workpro (WP473006)
The WORKPRO wood edge trimmer machine — Model WP473006, is ideal for professional woodworking tasks such as edge trimming, laminate cutting, end finishing, and high-precision furniture manufacturing. It is characterized by its light weight and ease of control, making it suitable for workshops and professionals. Kit Contents: WORKPRO WP473006 Laminate Trimmer device Transparent base for clear visibility Height adjustment key Maintenance key / Tighten Wrench Trimmer bit (if included) Features: Lightweight and easy-to-control design for high-precision edge trimming. Transparent base provides better visibility during operation. Excellent cutting depth control with an easy and fast adjustment system. Suitable for wood, MDF, laminate, and plywood. Powerful motor ensures smooth and consistent cutting without vibrations. Technical Specifications (Expected): Model WP473006 Brand WORKPRO Device Type Laminate Trimmer – Edge Trimmer Machine Power Expected 500–600W No-load Speed Expected 28000–30000 RPM Collet Diameter 6 mm or 6.35 mm (1/4") Cutting Depth 0–20 mm (approx.) Usage Edge trimming – MDF – Wood – Laminate – Furniture manufacturing
48.350 JD
-
Crown Router Charger without batteries and charger 20V Crown | CT26010HX
Description:The Crown CT26010HX Cordless Router is designed for professional woodworking tasks, offering freedom of movement and high precision without the limitations of cords. Key Features: Powered by a 20V Max battery for extended runtime without memory effect. Brushless motor ensures higher efficiency, durability, and less maintenance. Variable no-load speed ranging from 10,000 to 30,000 RPM to suit various routing applications. Compatible with 6mm and 8mm collets, offering flexibility in using different router bits. Integrated LED light to improve visibility in low-light conditions. Specifications: Dimensions: Approximately 24.3 × 19 × 14.5 cm Weight: 2 kg Material: High-quality materials to ensure durability Color Options: Standard industrial gray and black design Power Requirements: Operates with a 20V Max battery (battery and charger may be sold separately) Other Specifications: Router base with 20mm movement, compatible with Crown batteries CAB202013XE, CAB204014XE, CAB204015XE, CAB205014XE, CAB208016XE
85.000 JD
-
Crown Crown Router 430W | CT11020
Description: The CROWN CT11020 router is a compact and efficient tool designed for precise woodworking tasks. Key Features: 430W power No-load speed up to 26,000 RPM Collet diameter 6mm Plunge depth 30mm Spindle lock for easy bit changes Plunge depth control system Lock-on function for continuous operation Dust extraction system for a clean workspace Specifications: Dimensions: 25 x 21 x 12.5 cm (packaging) Weight: 1.5 kg Power Requirements: 220-230V, 2.1A Other Specifications: EAN Code: 7640177421753
45.000 JD
-
Crown Electric Router 710W Crown | CT11023
Description: The CROWN CT11023S hand router is compact and lightweight, designed for precise woodworking tasks. Key Features: 710W power Variable no-load speed from 13,000 to 33,000 rpm Collet diameter 6/8 mm Plunge depth 20 mm Specifications: Dimensions: 34 x 23 x 20 cm (packaging) Weight: 1.45 kg Power requirements: 220-230V, 3.4A Other specs: EAN code: 7640186244237
77.000 JD
-
WORKPRO Reamer for WorkPro (WP309006)
The WORKPRO WP309006 deburring tool is a compact and durable pipe reamer, designed to remove burrs and finish the internal and external edges of pipes. It is suitable for various materials, ensuring smooth finishes for perfect pipe installation. Key Features: Dual-function design for internal and external reaming Durable plastic body with hardened steel blades Suitable for copper, aluminum, brass, PVC, and PPR pipes Compact size for easy handling and storage Efficiently removes burrs to prevent pipe damage Specifications: Dimensions: Approximately 40 mm (1.6 inches) diameter x 46 mm (1.8 inches) height Weight: Approximately 50 grams Material: Plastic body with alloy steel blades Color Options: Red Power Requirements: Manual operation Other Specifications: Suitable for pipe sizes ranging from 3/16 inch to 1-1/4 inches
5.850 JD
-
Bison Rubber Seal Rubber Insulating Coating 2.5L by Bison (6310102)
Bison Rubber Seal is a revolutionary rubber-based coating for 100% waterproof sealing, protection, and repair. Its superior universal quality makes it suitable for almost all surfaces, both indoors and outdoors, from bathroom waterproofing to gutter repair, garden wood protection, and water connections. Key Features: 100% waterproof and protection against corrosion and rust. Exceptional permanent elasticity up to 750% to resist surface expansion and contraction. Easy to apply with a brush, roller, or squeegee. Resistant to all weather conditions, UV rays, salts, and chemicals. Long-lasting quality: minimum lifespan of 20 years (according to EN 1297 standards). Safe and environmentally friendly: water-based, solvent-free, non-toxic, and VOC-free. Can be painted over once dry (testing recommended first). Technical Specifications: Product Name: Rubber Seal. Product Number: 6313124. EAN: 8710439268798. Type: 2.5 liter bucket (black). Consumption rate: 1.5 - 2.5 liters per square meter. Applications and Uses: Suitable for: Wood, concrete, stone, metal, zinc, bitumen, PVC, and good adhesion to PP/PE. Examples of use: Shower floor waterproofing, gutter repair, drainage pipes, window frames, building foundations, and protection of wooden garden posts. Not suitable for: Fixing tiles to walls or floors, and not for protecting furniture or clothing. How to Use: Ensure the surface is completely clean and dry. Stir the contents thoroughly by hand until the color is uniform. Apply at least two coats with a 10-minute interval between them, ensuring the total layer thickness reaches a minimum of 2 mm. The surface will be dust-dry after 3 hours, rain-resistant after 12 hours, and fully cured after 48 hours. For sealing large cracks, it is recommended to use it with "Bison Rubber Seal Textile Tape" to ensure a durable layer build-up.
29.000 JD
-
Bison Rubber Seal Rubber Sealant 250g by Bison (6313120)
Bison Rubber Seal® – is a high-quality rubber-based coating for 100% waterproof sealing, protection, and repair. With its practical size (250g tube), it is an ideal solution for precise and quick repairs in tight spaces, joints, and water connections, providing a flexible protective layer that completely prevents leakage. Key Features: Complete waterproofing and effective protection against corrosion and rust. Exceptional permanent flexibility up to 750% to resist expansion and surface cracks. Easy to apply and suitable for indoor and outdoor use. UV-resistant and resistant to all weather conditions, salts, and chemicals. Safe and environmentally friendly: water-based, solvent-free, non-toxic, and low-emission (EC-1 Plus). Long-lasting quality: guaranteed durability for at least 20 years. Paintable after complete drying (initial test recommended). Technical Specifications: Product Name: Rubber Seal. Product Number: 6313120. EAN: 8710439268750. Type: Tube (250g, black). Consistency: Gel. Applications and Uses: Suitable for: Wood, concrete, stone, metal, zinc, bitumen, PVC, and shows good adhesion to PP/PE. Examples of Use: Sealing shower trays, repairing gutter cracks, drainage pipe connections, window frames, and protecting wooden garden posts. Not suitable for: Protecting clothes or furniture, and not used for tiling walls or floors. How to Use: Ensure the surface is completely dry and clean. Stir the product well manually before application. Apply at least two coats using a brush or roller with a 10-minute interval between them, ensuring a total thickness of at least 2 mm. The surface will be dust-dry after 3 hours and rain-resistant after 12 hours, with full curing after 48 hours. For reinforcing large cracks, use Bison Rubber Seal Textile Tape between the two layers.
5.000 JD
-
Bison Bison Rubber Seal 310g (6313122)
Bison Rubber Seal – is a high-quality rubber-based coating for 100% waterproof sealing, protection, and repair. Packaged in a cartridge, it is ideal for precise applications and easily sealing cracks, seams, and joints using a caulk gun, ensuring complete waterproof sealing on various surfaces. Key Features: Complete waterproofing and comprehensive protection against corrosion and rust. Exceptional permanent elasticity of up to 750% to resist surface expansion and contraction without cracking. Easy and precise application using a cartridge gun. Resistant to UV radiation, all weather conditions, salts, and chemicals. Safe and environmentally friendly: water-based, solvent-free, non-toxic, and low VOC. Long-lasting quality: guaranteed durability for at least 20 years (tested according to EN 1297). Paintable after complete drying (preliminary test recommended). Technical Specifications: Product Name: Rubber Seal Cartridge. Product Number: 6313122. EAN: 8710439268774. Type: Cartridge, 310 grams (black). Consistency: Gel. Applications and Uses: Suitable for: Wood, concrete, stone, metal, zinc, bitumen, PVC, and shows good adhesion to PP/PE. Examples of use: Sealing seams and cracks, insulating drain pipe connections, protecting gutters, and window frames. Not suitable for: Protecting clothing or furniture, and not for fixing tiles to walls or floors. Instructions for Use: The surface must be clean, dry, and free of dust and grease. Insert the cartridge into the gun and apply the material into cracks or onto joints. For best results, apply a minimum layer thickness of 2 mm. The surface will be dust-dry after approximately 3 hours, can withstand rain after 12 hours, and fully cures after 48 hours. For sealing larger gaps, it is recommended to use with Bison Rubber Seal Textile Tape.
6.500 JD
-
Bison Bison Rubber Seal Rubber Coating 5 Liter (6313124)
Bison Rubber Seal® is a revolutionary rubber-based coating designed for 100% waterproof sealing, protection, and repair. It boasts superior universal quality, making it suitable for almost all surfaces, both indoors and outdoors, from waterproofing bathrooms to repairing gutters and protecting garden timber and water connections. Key Features: 100% waterproof and protection against corrosion and rust. Exceptional permanent elasticity up to 750% to resist surface expansion and contraction. Easy to apply with a brush, roller, or squeegee. Resistant to all weather conditions, UV radiation, salts, and chemicals. Long-lasting quality: minimum lifespan of 20 years (according to EN 1297 standards). Safe and eco-friendly: water-based, solvent-free, non-toxic, and free of volatile organic compounds (VOC). Paintable after drying (testing recommended first). Technical Specifications: Product Name: Rubber Seal. Product Number: 6313124. EAN: 8710439268798. Type: 5-liter bucket (black). Coverage: 1.5 - 2.5 liters per square meter. Applications and Uses: Suitable for: Wood, concrete, stone, metal, zinc, bitumen, PVC, and good adhesion to PP/PE. Examples of Use: Shower floor waterproofing, gutter repair, drainage pipes, window frames, building foundations, and protecting wooden garden posts. Not suitable for: Tiling walls or floors, and not for protecting furniture or clothing. Instructions for Use: Ensure the surface is perfectly clean and dry. Stir the contents well by hand until the color is uniform. Apply at least two layers with a 10-minute interval between them, ensuring a total layer thickness of at least 2 mm. The surface is dust-dry after 3 hours, can withstand rain after 12 hours, and fully hardens after 48 hours. For sealing large cracks, it is recommended to use it with "Bison Rubber Seal Textile Tape" to ensure a strong layer build-up.
59.000 JD
-
Bison Bison Rubber Seal Rubber Coating 750ml (6310093)
Bison Rubber Seal® – A high-quality rubber-based coating designed for 100% waterproof sealing, protection, and repair. It offers exceptional flexibility and adhesion to almost all surfaces, making it the ideal solution for waterproofing everything from indoor bathrooms to external gutters and roofs. Key Features: Complete waterproofing and comprehensive protection against corrosion and erosion. Superior permanent flexibility up to 750% to accommodate surface movements without cracking. Easy application with a brush, roller, or squeegee. UV resistant and withstands all harsh weather conditions. Long-lasting quality: minimum 20-year lifespan (tested according to EN 1297). Environmentally safe: water-based, solvent-free, non-toxic, and VOC-free. Resistant to salts and chemicals, and paintable after drying. Technical Specifications: Product Name: Rubber Seal. Product Number: 6313129. EAN: 8710439268835. Size: 750 ml pot. Consumption Rate: 1.5 to 2.5 liters per square meter. Applications and Uses: Suitable for: Wood, concrete, stone, metal, zinc, bitumen, PVC, and shows good adhesion to PP/PE. Examples of Use: Sealing shower trays, gutters, drain pipes, window frames, and protecting wooden garden posts. Not suitable for: Protecting clothes or furniture, and not to be used for fixing tiles on walls or floors. Application Method: Stir the product thoroughly by hand until the color is uniform. Apply at least two coats with a 10-minute interval between them, ensuring a minimum coat thickness of 2 mm. The surface will be dust-dry after 3 hours, able to withstand rainwater after 12 hours, while full curing is achieved after 48 hours. It is recommended to use Bison Rubber Seal Textile Tape to reinforce strength and seal large cracks.
10.000 JD
-
KAZBER 960W Concrete Vibrator with 2m Hose
Technical Specifications: Brand: KZUBR. Type: Electric Concrete Vibrator. Power: 960 Watts – Powerful motor for continuous use. Hose: 2 meters – Heavy Duty for greater durability. Vibrator Head: Made of reinforced steel, wear-resistant. Frequency: High for air release and better concrete compaction. Voltage: 220 – 240 Volts. Uses: Concrete pouring in foundations, walls, and columns. Small and medium construction projects. Ensures high concrete density and prevents air voids. Features: Practical design, relatively light, and easy to carry. Heavy-duty hose ensures longer life with use. Consistent vibration power for uniform results. Economical in electricity consumption.
49.500 JD
-
WORKPRO Workpro 20V Cordless Tile Vibrator (WP397018)
WORKPRO Cordless Tile Vibrator and Installation Machine – 20V – Model WP397018 – is the innovative tool every tiler needs to ensure perfect installation free of air voids. This machine combines high suction power with adjustable vibrations, making the process of laying and securing tiles, ceramics, and porcelain precisely and quickly. Professional Features and Benefits: Immense Suction Power (50 kg): Equipped with a strong suction cup base with a diameter of 123 mm, allowing you to lift and move heavy and large tiles with ease and safety, placing them accurately in their correct position. Variable Vibration Frequency: The machine offers adjustable vibration speeds ranging from 3500 to 8500 vibrations per minute, ensuring even distribution of adhesive under the tile and preventing future breakage. Cordless Freedom: Powered by a 20V lithium battery, giving you complete freedom of movement on construction sites without the constraints of power cords. Ergonomic and Balanced Design: With an ideal weight of 2 kg, the machine provides a comfortable grip that reduces hand fatigue during work in large areas and ensures superior control during vibration. Durable Protection (BMC Case): The machine comes in a durable plastic case to protect it from shocks and dust and facilitate its transport between work sites. [Image showing the vibration machine in action on a large porcelain tile] Technical Specifications (WP397018): Voltage: 20V (Li-ion). Vibration Frequency: 3500 - 8500 vibrations per minute (min/1). Suction Power: Up to 50 kg. Suction Cup Diameter: 123 mm. Weight: 2 kg. Note: Battery and charger sold separately. Primary Uses: Installation of floor and wall tiles of various sizes. Securing ceramic, porcelain, marble, and granite. Removing air from under tiles to ensure maximum adhesion. Moving and lifting smooth panels that are difficult to grip by hand. Packaging: Comes in a durable carrying case (BMC). Packaged in a colorful cardboard box for additional protection. Technical Tip: For best suction power, always ensure the rubber suction cup is clean and the tile surface is free of dust or moisture before lifting.
41.750 JD
-
67.000 JD
-
Yale Door closer 90 kg, silver, fire-rated, Yale
This high-quality door closer is designed for doors weighing up to 80 kg. It ensures smooth opening and closing operations and is resistant to rust and corrosion. The product is easy to install and comes with screws and an instruction manual for setup. Key Features: Hydraulic system Weather-resistant coating Made of heavy-duty metal Available in glossy silver Specifications: Maximum Door Weight: 80 kg Mechanism: Hydraulic Coating: Weather-resistant Material: Heavy-duty metal Color: Glossy silver
20.000 JD
-
CISA Cisa Italian door closer 65kg white (60460.03.97QT)
CISA Hydraulic Door Closer – Model 60460.03.97QT – White Color – An advanced professional solution featuring the "Multifuerza" system, which provides high flexibility in controlling closing force, with an elegant white design suitable for modern doors and offices. Features and Technical Specifications: High-Quality Structure: The closer body is made of durable aluminum alloy, with an adjustable steel geared arm to ensure maximum stability. Advanced Hydraulic System: Contains a special steel spring immersed in an oil bath to ensure smooth opening and closing movement. No Hold-Open (S/Retención): Designed to permanently close the door to enhance security and privacy levels. Reversible: Can be installed on doors that open to the right or left without any obstructions. Adjustment and Control Options: Closing Force: Multi-force adjustable between levels EN 2-4. Closing Speed: Independent regulating valves to control door closing speed. Latching Speed (Closing Stroke): A special valve to control the force of the final stroke to ensure the lock closes securely. Technical Specifications: Weight Capacity: Designed for doors weighing up to 65 kg. Color: White (Blanco). Model: 60470.03.0.45. Included Components: White hydraulic door closer body. Adjustable steel arm. Mounting screw kit and technical installation guide. Technical Tip: This model is recommended for use in corridors and doors that require constant automatic closing to ensure sound and heat insulation, taking into account the adjustment of the hydraulic valves to match the actual door weight.
18.000 JD
-
CISA Cisa 80kg Italian Door Closer, Silver (60460.03.97QT)
CISA Hydraulic Door Closer – Series 1.60460.03.97QT – Silver Color – A professional solution to ensure smooth and secure door closing. It features a compact design and high durability, making it suitable for residential and commercial doors. Features and Characteristics: Durable Structure: The closer body is made of a special aluminum alloy, with an arm and spring made of hardened steel immersed in an oil bath to ensure smooth movement and longevity. Advanced Hydraulic System: Provides precise control over opening and closing operations, with a strong final closing feature to ensure the latch engages securely. Reversible: Can be installed on doors that open to the right or left, whether in normal or reversed position. Without Hold-Open Feature: This model is designed to always close the door, enhancing safety and security standards. Technical Specifications: Load Capacity: Designed for doors weighing up to 80 kg. Suitable Door Width: Supports doors up to 110 cm wide. Force: Adjustable between grades 2 to 4 via a dedicated hydraulic valve. Net Weight of Device: 1.7 kg. Color: Silver. Standard Box Contents: Hydraulic closer body. Steel connecting arm. Mounting screw kit and instruction manual. Technical Tip: To ensure optimal performance, it is recommended to adjust the closing speed after installation to match the door's weight and air currents, ensuring quiet and secure closing every time.
18.000 JD
-
Crown Round polish roll cup crown
The Crown CTWBP0044 brush is a circular brush designed for surface finishing and cleaning applications. Featuring a plastic core with domestic nylon abrasive bristles, it is suitable for various materials. Key Features: High-Quality Abrasive Material: Equipped with nylon abrasive bristles for effective surface treatment. Standard Size: Dimensions of Ø110 x 100 mm ensure compatibility with standard equipment. Versatile Application: Ideal for cleaning, deburring, and surface finishing tasks on various materials. Specifications: Dimensions: Ø110 mm (diameter) x 100 mm (width) Abrasive Material: Domestic Nylon Abrasive Grit Size: 1.20-1.4 mm Core Material: Plastic Application: Suitable for surface finishing and cleaning applications.
25.000 JD
-
ARMORALL Armor All Tyre Foam 500ml
4.750 JD
-
1.000 JD
You have seen 1008 out of 4066 products