Products
-
TOTAL إزميل SDS Plus 250x20 ملم توتال TAC15121411
إزميل SDS Plus 250x20 ملم توتال TAC15121411 إزميل SDS Plus 250x20 ملم من توتال TOTAL، موديل TAC15121411، مخصص لـأعمال النقر والإزالة والتشكيل ضمن المادة المناسبة لنوع الإزميل. يندرج ضمن ازاميل الحفر لدى البشيتي – بشيتي ستورز في الأردن. اختيار شكل الإزميل المناسب يمنح تحكمًا أفضل في موضع الإزالة. المواصفات الفنية العلامة التجارية: TOTAL – توتال رقم الموديل: TAC15121411 نظام التثبيت: SDS Plus القياس: 250x20 ملم الاستخدامات ومن يحتاجه يناسب فنّي البناء والتشطيب والصيانة الذي يحتاج إلى أعمال النقر والإزالة والتشكيل ضمن المادة المناسبة لنوع الإزميل. قارن القياسات والتجهيزات المذكورة مع متطلبات العمل قبل اختيار الصنف؛ فمطابقة الأداة للمهمة تسهّل التجهيز وتساعد على استخدام الملحقات المناسبة. دليل الاختيار والاستخدام طابق نظام تثبيت SDS مع الهامر المستخدم، وافصل مصدر الطاقة قبل تغيير الإزميل، واستخدم وضع التكسير مع واقي العين.. افحص الأداة قبل الاستخدام، ونظّفها بعد العمل واحفظها في مكان جاف بعيدًا عن الرطوبة. اتبع تعليمات المنتج عند تشغيله أو تركيبه. أسئلة شائعة ما استخدام موديل TAC15121411؟ يستخدم في أعمال النقر والإزالة والتشكيل ضمن المادة المناسبة لنوع الإزميل. ومن مواصفاته: نظام التثبيت: SDS Plus؛ القياس: 250x20 ملم. كيف أختار الصنف المناسب؟ طابق المقاسات والخامات الواردة في المواصفات مع القطعة أو الأداة التي تعمل عليها. عند طلب عدة أصناف للورشة، استخدم رقم الموديل لتحديد كل قطعة بدقة. اطلبه من بشيتي ستورز أضف إزميل SDS Plus 250x20 ملم إلى تجهيزاتك من شركة يوسف البشيتي. استعرض ازاميل الحفر لاختيار أدوات تكمل احتياجات العمل، واذكر الموديل TAC15121411 عند الاستفسار عن طلبات الورش والتجار.
2.800 JD
-
TOTAL إزميل باطون توتال THT4530416
إزميل باطون توتال THT4530416 إزميل باطون من توتال TOTAL، موديل THT4530416، مخصص لـأعمال النقر والإزالة والتشكيل ضمن المادة المناسبة لنوع الإزميل. يندرج ضمن ازاميل الحفر لدى البشيتي – بشيتي ستورز في الأردن. اختيار شكل الإزميل المناسب يمنح تحكمًا أفضل في موضع الإزالة. المواصفات الفنية العلامة التجارية: TOTAL – توتال رقم الموديل: THT4530416 مادة التصنيع: 40Cr القياس: 4mm*16mm*305mm الاستخدامات ومن يحتاجه يناسب فنّي البناء والتشطيب والصيانة الذي يحتاج إلى أعمال النقر والإزالة والتشكيل ضمن المادة المناسبة لنوع الإزميل. قارن القياسات والتجهيزات المذكورة مع متطلبات العمل قبل اختيار الصنف؛ فمطابقة الأداة للمهمة تسهّل التجهيز وتساعد على استخدام الملحقات المناسبة. دليل الاختيار والاستخدام طابق شكل الطرف ونظام التثبيت مع المهمة؛ استخدم واقي العين وثبّت قطعة العمل. افحص الأداة قبل الاستخدام، ونظّفها بعد العمل واحفظها في مكان جاف بعيدًا عن الرطوبة. اتبع تعليمات المنتج عند تشغيله أو تركيبه. أسئلة شائعة ما استخدام موديل THT4530416؟ يستخدم في أعمال النقر والإزالة والتشكيل ضمن المادة المناسبة لنوع الإزميل. ومن مواصفاته: مادة التصنيع: 40Cr؛ القياس: 4mm*16mm*305mm. كيف أختار الصنف المناسب؟ طابق المقاسات والخامات الواردة في المواصفات مع القطعة أو الأداة التي تعمل عليها. عند طلب عدة أصناف للورشة، استخدم رقم الموديل لتحديد كل قطعة بدقة. اطلبه من بشيتي ستورز أضف إزميل باطون إلى تجهيزاتك من شركة يوسف البشيتي. استعرض ازاميل الحفر لاختيار أدوات تكمل احتياجات العمل، واذكر الموديل THT4530416 عند الاستفسار عن طلبات الورش والتجار.
3.000 JD
-
Crown Pointed Chisel SDS-Plus
Description: The Crown SDS-Plus Point Chisel is designed for effective use in masonry and concrete work. Its pointed design allows for precision in drilling and joint cleaning, making it ideal for demolition and renovation tasks. Key Features: 14mm diameter and 250mm length for optimal reach and efficiency Compatible with SDS-Plus shank systems Constructed from chrome alloy steel for enhanced durability Specifications: Dimensions: 14 mm (Diameter) x 250 mm (Length) Weight: Approximately 0.25 kg Material: Chrome Alloy Steel Color Options: Silver Power Requirements: Designed for use with SDS-Plus compatible rotary hammers Other Specifications: Sandblasted finish for corrosion resistance
3.000 JD
-
Crown SDS-Plus Flat Chisel
Description: The Crown SDS-Plus flat chisel is designed for efficient chiseling and demolition tasks in materials such as concrete, brick, and masonry. Its flat design allows for precise material removal, making it ideal for surface scaling, tile removal, and general chiseling applications. Key Features: Dimensions: 14mm (Shank Diameter) x 250mm (Length) x 20mm (Chisel Width) Compatible with SDS-Plus rotary hammers Constructed from high-quality chromium alloy steel for enhanced durability Sand-blasted finish for increased corrosion resistance Specifications: Dimensions: 14mm (Shank Diameter) x 250mm (Length) x 20mm (Chisel Width) Weight: Approximately 300g Material: Chromium Alloy Steel Color Options: Silver Power Requirements: Designed for use with SDS-Plus compatible rotary hammers Other Specifications: Flat chisel design for efficient material removal
3.000 JD
-
Crown SDS-Plus Flat Chisel
The Crown CAM-PF025 is an SDS-Plus flat chisel designed for efficient chiseling and demolition tasks in materials like concrete, brick, and masonry. Key Features: High-Quality Construction: Made from high-grade steel for enhanced durability and longevity. Efficient Design: The flat chisel design allows for precise chiseling and efficient material removal. Compatibility: SDS-Plus shank ensures compatibility with most SDS-Plus rotary hammers. Specification: Shank Type: SDS-Plus Material: High-grade steel Application: Ideal for chiseling and demolition in concrete, brick, and masonry.
3.000 JD
-
WORKPRO WORKPRO SDS-Plus Flat Chisel
WORKPRO SDS-Plus Flat Chisel, 20x14x250mm, designed for strong and continuous performance in concrete, tiles, and brick walls. Made of 40Cr steel with a forged tip to ensure high durability and impact resistance, compatible with SDS-Plus electric drills. Key Features: Hardened 40Cr steel body with a forged tip for high impact resistance 20mm blade width ideal for light breaking and channeling work SDS-Plus shank to ensure a secure fit in rotary hammer drills Specifications: Specification Value Chisel Width 20 mm Blade Thickness 14 mm Overall Length 250 mm Material Hardened 40Cr steel Shank Type SDS-Plus Suitable Materials Concrete, Brick, Tiles, Walls
2.920 JD 2.200 JD
-
Crown Chisel with simplified hexagonal shank crown
The Crown CTSCP0013A is a flat chisel with a hexagonal shank, designed for efficient drilling and demolition tasks in materials such as concrete and masonry. Key Features: High-Quality Construction: Made from high-grade steel for enhanced durability and longevity. Hexagonal Shank: Provides a secure grip and reduces slippage during operation. Flat Chisel Design: Allows for precise material removal and surface smoothing. Specifications: Dimensions: 28mm (Width) x 410mm (Length) Shank Type: Hexagonal Material: High-grade steel Application: Ideal for demolition and carving in concrete and masonry.
14.000 JD
-
Crown Flat chisel SDS-Plus
The Crown CAM-PT0425 is an SDS-Plus tile chisel designed for efficient removal of wall and floor tiles. Its specialized design allows for clean and quick tile removal, making it ideal for renovation and demolition projects. Key Features: Optimized Design: Specifically engineered for tile removal, ensuring minimal damage to underlying surfaces. High-Quality Material: Made from durable steel to withstand the demands of heavy-duty use. Compatibility: Features an SDS-Plus shank, compatible with most SDS-Plus rotary hammers. Specifications: Shank Type: SDS-Plus Material: High-Quality Steel Application: Designed for wall and floor tile removal.
4.000 JD
-
Crown Chisel crown
The Crown CTSCP0012A is a pointed chisel featuring a hexagonal shank, designed for heavy-duty chiseling and demolition tasks in materials like concrete and masonry. Key Features: High-Quality Construction: Made from durable steel to withstand rigorous use. Hexagonal Shank: Provides a secure grip and reduces slippage during operation. Pointed Tip: Ideal for precise chiseling and breaking in hard materials. Specifications: Shank Type: Hexagonal Tip Type: Pointed Material: High-Quality Steel Application: Suitable for demolition and chiseling in concrete and masonry.
14.000 JD
-
WORKPRO WORKPRO SDS-Max Pointed Chisel
WORKPRO SDS‑Max Chisel, 400 mm in length and 18 mm in diameter, made of 40Cr hardened steel with a forged pointed tip. Ideal for precise execution in reinforced concrete, brick walls, floor tiles, and ceramics, and features full compatibility with heavy-duty hammer drills. Key Features: Forged 40Cr steel tip and body for high hardness and durability in heavy-duty use 18 mm pointed diameter and 400 mm total length aids in targeted scraping, breaking, and light chiseling in construction and stone structures SDS‑Max shank for strong fastening and guaranteed high performance in heavy-duty drills and hammers Specifications: Specification Value Tip Diameter 18 mm Total Length 400 mm Material Hardened 40Cr Steel Tip Type Forged Pointed Shank Type SDS‑Max Suitable Materials Reinforced Concrete, Brick, Tile, Ceramics, Mortar
6.000 JD 4.400 JD
-
TOTAL إزميل مدبب ثقيل 300 ملم توتال THT4421219
إزميل مدبب ثقيل 300 ملم توتال THT4421219 إزميل مدبب ثقيل 300 ملم من توتال TOTAL، موديل THT4421219، مخصص لـأعمال النقر والإزالة والتشكيل ضمن المادة المناسبة لنوع الإزميل. يندرج ضمن ازاميل الحفر لدى البشيتي – بشيتي ستورز في الأردن. اختيار شكل الإزميل المناسب يمنح تحكمًا أفضل في موضع الإزالة. المواصفات الفنية العلامة التجارية: TOTAL – توتال رقم الموديل: THT4421219 الطول: 300 ملم حجم الراس: 4 ملم الوزن: 0.95 كغم حجم المقبض: 18 ملم الاستخدامات ومن يحتاجه يناسب فنّي البناء والتشطيب والصيانة الذي يحتاج إلى أعمال النقر والإزالة والتشكيل ضمن المادة المناسبة لنوع الإزميل. قارن القياسات والتجهيزات المذكورة مع متطلبات العمل قبل اختيار الصنف؛ فمطابقة الأداة للمهمة تسهّل التجهيز وتساعد على استخدام الملحقات المناسبة. دليل الاختيار والاستخدام طابق شكل الطرف ونظام التثبيت مع المهمة؛ استخدم واقي العين وثبّت قطعة العمل. افحص الأداة قبل الاستخدام، ونظّفها بعد العمل واحفظها في مكان جاف بعيدًا عن الرطوبة. اتبع تعليمات المنتج عند تشغيله أو تركيبه. أسئلة شائعة ما استخدام موديل THT4421219؟ يستخدم في أعمال النقر والإزالة والتشكيل ضمن المادة المناسبة لنوع الإزميل. ومن مواصفاته: الطول: 300 ملم؛ حجم الراس: 4 ملم. كيف أختار الصنف المناسب؟ طابق المقاسات والخامات الواردة في المواصفات مع القطعة أو الأداة التي تعمل عليها. عند طلب عدة أصناف للورشة، استخدم رقم الموديل لتحديد كل قطعة بدقة. اطلبه من بشيتي ستورز أضف إزميل مدبب ثقيل 300 ملم إلى تجهيزاتك من شركة يوسف البشيتي. استعرض ازاميل الحفر لاختيار أدوات تكمل احتياجات العمل، واذكر الموديل THT4421219 عند الاستفسار عن طلبات الورش والتجار.
3.700 JD
-
WORKPRO Workpro 30 cm Pointed Chisel
WORKPRO Point Chisel 30 cm The WORKPRO 30 cm point chisel helps you trim or separate materials with the appropriate chisel. Compare specifications and match the item with your type of work, and choose the right option before ordering. Specifications Brand: WORKPRO Model or Product Code: WP242001 Mentioned Size: 30 cm Uses and Target Audience Suitable for maintenance and renovation workshops when needing to trim or separate materials with the right chisel. Review site requirements and compatibility with existing equipment before ordering. Installation and Use Align the chisel head with the material, secure the piece, check the striking head, and use eye protection. FAQ Can a metal chisel be used instead of a wood chisel? The cutting edge angle and working method differ; choose a tool designed for the specific material. How do I order the right model or option? Send the product name, quantity, and required option, along with a photo of the equipment or its measurements if matching is needed. Order from Yousef Bashiti Company You can find this product at Bashiti Stores — Yousef Bashiti Company under Hand Tools and Chisels. Visit us at our Bayader and Wehdat branches in Amman, and for information, orders, and bulk price quotes, contact us at 0795756898. Related Product Also compare the WORKPRO Flat Chisel 30 cm based on the size and equipment required.
6.650 JD 5.000 JD
-
WORKPRO Workpro SDS Max Pointed Chisel, 400 mm length
WORKPRO SDS Max Pointed Chisel 400mm The WORKPRO SDS Max Pointed Chisel 400mm helps you break or trim construction materials with the appropriate chisel. Compare the specifications and equipment compatibility with the nature of your work, and choose the right option before ordering. Specifications Brand: WORKPRO Model or Product Code: WP401404 Stated Size: 400mm SDS Max System; Pointed head Uses and Target Users Suitable for construction and renovation technicians when there is a need to break or trim construction materials with a suitable chisel. Review site requirements and compatibility with existing equipment before ordering. Installation and Use Match the shank system with the hammer and select the breaking mode, disconnect the power before switching, and use dust control measures. FAQs Are SDS Plus, SDS Max, and Hex interchangeable? These are different mounting systems; choose the chisel that matches the device's tool holder and do not rely on length alone. How do I order the right model or option? Send the product name, quantity, and required option, along with a photo of the equipment or its dimensions if needed for matching. Order from Yousef Bashiti Company You can find this product at Bashiti Stores — Yousef Bashiti Company under Hand Tools and Chisels. Visit us at our Bayader and Wehdat branches in Amman, and for information, orders, and bulk price quotes, contact 0795756898. Related Product Also compare the WORKPRO SDS Plus Pointed Chisel 250mm depending on the size and equipment required.
5.850 JD 4.400 JD
-
WORKPRO WORKPRO SDS Plus Pointed Chisel, 250 mm length
WORKPRO SDS-Plus Point Chisel, 250 mm The WORKPRO SDS-Plus point chisel, 250 mm in length, helps you break or trim building materials with the appropriate chisel. Compare the specifications and equipment compatibility with your specific task, and choose the right option before ordering. Specifications Brand: WORKPRO Model or Product Code: WP401400 Stated Length: 250 mm SDS-Plus system; pointed tip Uses and Target Audience Suitable for construction and renovation technicians when there is a need to break or trim building materials with an appropriate chisel. Review site requirements and compatibility with existing equipment before ordering. Installation and Usage Match the shank system with your hammer drill and select the chiseling mode. Disconnect power before changing bits and use dust control measures. Frequently Asked Questions Are SDS-Plus, SDS-Max, and Hex interchangeable? These are different mounting systems; choose the chisel that matches your tool holder and do not rely on length alone. How do I order the right model or option? Send the product name, quantity, and required option, along with a photo or measurements of the equipment if matching is needed. Order from Yousef Bashiti Company You can find this product at Bashiti Stores — Yousef Bashiti Company under Hand Tools and Chisels. Visit us at our Bayader and Wahdat branches in Amman, and for information, orders, and bulk price quotes, contact 0795756898. Related Product Also compare the WORKPRO SDS-Plus Flat Chisel, 250 mm based on the size and equipment required.
2.900 JD 2.200 JD
-
Crown SDS-Plus Flat Chisel
The Crown SDS-Plus Flat Chisel CTSCP0002A is designed for efficient demolition, engraving, and shaping of masonry, concrete, and stone. It features a durable SDS-Plus shank, providing secure attachment and excellent performance. Its flat design, measuring 14 x 250 x 20mm, is ideal for precise cutting and carving tasks. Key Features: SDS-Plus shank for secure and stable fitting Flat design for efficient cutting and carving Suitable for masonry, concrete, and stone work High-quality steel construction for heavy-duty applications Specifications: Dimensions: 14 x 250 x 20mm Weight: Not specified Material: High-quality steel Color Options: Metallic finish Power Requirements: Compatible with SDS-Plus rotary hammers Other Specifications: Optimized for precise carving and long-lasting durability
3.000 JD
-
WORKPRO WORKPRO SDS-Max Flat Chisel
WORKPRO Flat Chisel Bit, measuring 25mm x 18mm x 400mm, made from hardened and forged 40Cr steel, designed for breaking up tiles, mortar, concrete, and brick walls. Equipped with an SDS-Max shank to ensure stability and a strong connection in heavy-duty equipment. Key Features: Forged 40Cr Steel: For extreme durability in tough working conditions. 25mm Wide Blade: Ideal for stripping surfaces and removing tiles and mortar. SDS-Max Shank: Ensures stable and vibration-free attachment in heavy-duty tools. 400mm Length: Allows for longer reach and better control during demolition. Specifications: Specification Value Blade Width 25mm Shank Diameter 18mm (SDS-Max) Overall Length 400mm Material Forged 40Cr Steel Blade Type Flat Suitable Materials Concrete, Brick, Mortar, Plaster
5.850 JD 4.400 JD
-
WORKPRO WORKPRO 30 cm Flat Chisel
WORKPRO 30cm Flat Chisel The WORKPRO 30cm flat chisel helps you trim or separate materials with a suitable chisel. Compare specifications and ensure the item matches the nature of your work, and select the appropriate option before ordering. Specifications Brand: WORKPRO Model or Product Code: WP242002 Stated Size: 30 cm Uses and Target Audience Suitable for maintenance and renovation workshops when there is a need to trim or separate materials with a suitable chisel. Check site requirements and compatibility with existing equipment before ordering. Installation and Usage Align the chisel head with the material, secure the workpiece, inspect the striking head, and use eye protection. Frequently Asked Questions Can a metal chisel be used instead of a wood chisel? The cutting edge angle and working method differ; choose a tool designed for the specific material. How do I order the appropriate model or option? Send the product name, quantity, and required option, along with a photo of the equipment or its dimensions if needed for matching. Order from Yousef Bashiti Company You can find the product at Bashiti Stores — Yousef Bashiti Company within the Hand Tools and Chisels collections. Visit us at our Bayader and Wehdat branches in Amman, and for information, orders, and bulk price quotes, contact us at 0795756898. Related Product Also compare the WORKPRO 30cm Point Chisel based on the required size and equipment.
6.650 JD 5.000 JD
-
WORKPRO Workpro Hex Flat Chisel, 280 mm length
WORKPRO Hex Flat Chisel 280 mm The WORKPRO Hex Flat Chisel 280 mm helps you break or trim construction materials with the appropriate chisel. Compare specifications and ensure tool compatibility with your work nature, and choose the right option before ordering. Specifications Brand: WORKPRO Model or product code: WP401408 Stated length: 280 mm Hex system; stated edge width 25 mm; verify the matching mounting shank Uses and Target Audience Suitable for construction and renovation technicians when there is a need to break or trim construction materials with a suitable chisel. Review site requirements and compatibility with existing equipment before ordering. Installation and Use Match the shank system with the hammer and select the chiseling mode; disconnect power before switching and use dust control measures. FAQ Are SDS Plus, SDS Max, and Hex interchangeable? These are different mounting systems; choose the chisel that matches the device holder and do not rely on length alone. How do I order the right model or option? Send the product name, quantity, and desired option, along with a picture of the equipment or its dimensions if matching is required. Order from Yousef Bashiti Company You can find this product at Bashiti Stores — Yousef Bashiti Company within Hand Tools and Chisels. Visit us at our Bayader and Wehdat branches in Amman, and for information, orders, and bulk price quotes, contact us at 0795756898. Related Product Also compare the WORKPRO SDS Max Flat Chisel 400 mm based on the required size and equipment.
5.000 JD 3.750 JD
-
WORKPRO WORKPRO SDS Max Flat Chisel, 400 mm length
WORKPRO SDS Max Flat Chisel, 400 mm Length The WORKPRO SDS Max Flat Chisel, 400 mm length, helps you break or trim construction materials with an appropriate chisel. Compare specifications and equipment compatibility with the nature of your work, and choose the right option before ordering. Specifications Brand: WORKPRO Model or product code: WP401405 Stated size: 400 mm SDS Max system; cutting edge width 25 mm Uses and Target Audience Suitable for construction and renovation technicians when there is a need to break or trim construction materials with an appropriate chisel. Review site requirements and compatibility with existing equipment before ordering. Installation and Use Match the shank system with the hammer and select the demolition mode, disconnect the power before switching, and use dust control measures. FAQ Are SDS Plus, SDS Max, and Hex interchangeable? These are different mounting systems; choose the chisel that matches your tool holder and do not rely on length alone. How do I order the correct model or option? Send the product name, quantity, and the required option, along with a photo of the equipment or its measurements when matching is needed. Order from Yousef Bashiti Co. You can find the product at Bashiti Stores — Yousef Bashiti Co. within Hand Tools and Chisels. Visit us at our Bayader and Wehdat branches in Amman, and for information, orders, and bulk price quotes, contact 0795756898. Related Product Also compare the WORKPRO SDS Max Pointed Chisel, 400 mm Length according to the size and equipment required.
5.850 JD 4.400 JD
-
WORKPRO WORKPRO SDS Plus Flat Chisel, 250 mm length
WORKPRO SDS Plus Flat Chisel, 250mm The WORKPRO SDS Plus Flat Chisel, 250mm, helps you break or trim construction materials with a suitable chisel. Compare specifications and tool compatibility with the nature of your work, and choose the right option before ordering. Specifications Brand: WORKPRO Model or Product Code: WP401401 Stated Size: 250mm SDS Plus system; tip width 20mm Uses and Target Audience Suitable for construction and renovation technicians when there is a need to break or trim building materials with an appropriate chisel. Review site requirements and compatibility with existing equipment before ordering. Installation and Use Match the shank system with the hammer and select the demolition mode; disconnect power before switching and use dust control measures. FAQs Are SDS Plus, SDS Max, and Hex interchangeable? These are different mounting systems; choose the chisel that matches the device holder and do not rely on length alone. How do I order the right model or option? Send the product name, quantity, and requested option, along with a photo of the equipment or its measurements if matching is required. Order from Yousef Bashiti Company You can find this product at Bashiti Stores — Yousef Bashiti Company under Hand Tools and Chisels. Visit us at our Bayader and Wehdat branches in Amman, and for information, orders, and bulk price quotes, contact us at 0795756898. Related Product Also compare the WORKPRO SDS Plus Pointed Chisel, 250mm based on the size and equipment required.
2.900 JD 2.200 JD
-
Crown SDS-Plus Point Chisel
The Crown SDS-Plus Point Chisel CTSCP0001A is specifically designed for demolition and chiseling tasks in masonry, concrete, and stone. With its robust SDS-Plus shank, it ensures secure fitting and efficient performance. Measuring 14x250mm, this chisel is ideal for precise breaking and demolition work. Key Features: SDS-Plus shank for secure and stable fitting Pointed design for precise chiseling and breaking Ideal for use on masonry, concrete, and stone Durable construction for heavy-duty tasks Specifications: Dimensions: 14 x 250 mm Weight: Not Specified Material: High-grade steel Color Options: Metallic finish Power Requirements: Compatible with SDS-Plus rotary hammers Other Specifications: Designed for precise and efficient chiseling
3.000 JD
-
Crown SDS-Plus Chisel Point Crown
The Crown CAM-PP145 is a 450mm SDS-Plus point chisel designed for heavy-duty demolition and chiseling tasks in materials such as concrete and masonry. Key Features: High-Quality Material: Made from chrome alloy steel for enhanced durability and strength. Optimized Design: The sandblasted finish reduces friction, improving efficiency during chiseling operations. Standard Compatibility: The SDS-Plus shank ensures compatibility with most rotary hammers equipped with SDS-Plus chucks. Specifications: Length: 450 mm Shank Type: SDS-Plus Material: Chrome Alloy Steel Finish: Sandblasted Application: Ideal for demolition, channeling, and breaking work in concrete and masonry.
4.500 JD
-
Goldblatt Gold Plat Large Grouting Cleaning Sponge G02089
Goldblatt Large Grout Sponge G02089 The Goldblatt Large Grout Sponge G02089 helps you wipe away grout residue during finishing. Compare the specifications and equipment compatibility with your specific task, and select the appropriate option before ordering. Specifications Brand: Goldblatt Model: G02089 Uses and Target Users Suitable for tile installation technicians when needing to wipe away grout residue during finishing. Review site requirements and compatibility with existing equipment before ordering. Installation and Use Dampen the sponge, wring it out, follow the grout cleaning timing, and rinse frequently. FAQ Should it be used with a lot of water? Excess water can affect the grout; follow the product instructions and avoid flooding the joints. How do I order the appropriate model or option? Send the product name, quantity, and required option, along with a photo of the equipment or its dimensions if matching is needed. Order from Yousef Bashiti Company You can find this product at Bashiti Stores — Yousef Bashiti Company under Cleaning Supplies. Visit us at our Bayader and Wehdat branches in Amman, and for information, orders, and bulk price quotes, contact us at 0795756898.
1.650 JD
-
No-parking sign is yellow
Yellow No Parking Sign The yellow no parking sign helps you clarify parking instructions on-site. Compare the specifications and product compatibility with your business needs, and choose the appropriate option before ordering. Specifications Yellow color No parking warning Uses and Who Is It For? Suitable for shops and parking areas when you need to clarify parking instructions on-site. Check the location requirements and compatibility with existing equipment before ordering. Installation and Use Place the sign in a clear location and secure it appropriately. FAQ Is it a barrier that prevents vehicle entry? This is a visual sign; it does not constitute a mechanical barrier for vehicle entry. How do I order the appropriate model or option? Send the product name, quantity, and required option, along with a photo or measurements of the equipment if matching is needed. Order from Yousef Bashiti Company You can find this product at Bashiti Stores — Yousef Bashiti Company under Public Safety and Directional Signs. Visit us at our Bayader and Wehdat branches in Amman. For information, orders, and bulk price quotes, contact us at 0795756898.
6.000 JD
You have seen 144 out of 6505 products