Products
-
Chrome Plastic Bidet Sprayer Head with Grooved Handle MSC60301-3
Chrome Plastic Bidet Sprayer Head with Grooved Handle MSC60301-3 Chrome plastic bidet sprayer head with a grooved handle, model MSC60301-3, designed to equip your water point with the appropriate piece for daily use. This item, model MSC60301-3, features a plastic body, helping you compare the required fitting before purchasing. Specifications and Equipment Model: MSC60301-3 Plastic body Chrome finish Grooved handle Hose not included Item code: 2041230000249 How does it meet your needs? Handheld bidet sprayer head for use with a compatible hose and valve. The pressure-activated handle allows for water flow control during use, with a design that makes it easy to grip and return to the holder. Before ordering and installation Check the connection thread against the hose before installation. Close the bidet supply valve after use; do not rely on the sprayer button as a substitute for the valve. Note the item contents: this is a separate head. Order the Chrome Plastic Bidet Sprayer Head with Grooved Handle MSC60301-3 from Al-Bishiti — Bishiti Stores in Jordan. Send the item code and a photo of your existing part to inquire about compatibility and outfit your bathroom or kitchen needs.
3.000 JD
-
Stainless steel bidet sprayer head, 1/2 inch, hose not included
1/2-inch Stainless Steel Bidet Sprayer Head without Hose A 1/2-inch stainless steel bidet sprayer head without a hose, designed to equip your water point with the appropriate component for daily use. This item includes the sprayer head only, made of stainless steel, helping you compare the required setup before purchase. Specifications and Equipment Sprayer head only Stainless steel G1/2 male thread Push trigger Without hose or holder Item code: 2040570000984 How does it meet your needs? A handheld bidet sprayer for use with a compatible hose and valve. The push trigger allows you to control water flow during use, with a design that is easy to hold and return to the holder. Before ordering and installation Match the connection thread with the hose before installation. Close the bidet supply valve after use; do not rely on the sprayer button as a substitute for the valve. Please review the item contents: this is a separate head. Order the 1/2-inch stainless steel bidet sprayer head without a hose from Al-Bashiti — Bashiti Stores in Jordan. Send the item code and a picture of your existing part to inquire about compatibility and to outfit your bathroom or kitchen needs.
4.380 JD
-
Chrome bidet sprayer head with rear-press handle, hose not included
Chrome Bidet Spray Head with Rear Trigger Handle, Hose Not Included A chrome bidet spray head with a rear trigger handle, excluding the hose, to equip your water point with the appropriate piece for daily use. This item includes only the bidet spray head with a rear trigger handle, helping you verify the required setup before purchase. Specifications and Equipment Bidet spray head only Rear trigger handle Chrome finish Hose not included Item code: 2041230000177 How it meets your needs? A handheld bidet spray head for use with a compatible hose and valve. The trigger handle allows for water flow control during use, with a design that is easy to grip and return to the holder. Before ordering and installation Match the connection thread with the hose before installation. Close the bidet supply valve after use; do not rely on the spray head button as a substitute for the valve. Note the item contents: this is a separate head. Order the chrome bidet spray head with rear trigger handle, hose not included, from Al-Bashiti — Bashiti Stores in Jordan. Send the item code and a photo of your existing part to inquire about compatibility and prepare your bathroom or kitchen needs.
3.240 JD
-
NEW STAR New Star Single Chrome Bidet Sprayer Head with Classic Angled Design and Rear Pressure Handle
رأس شطاف كروم زاوية نيو ستار استبدل رأس الشطاف منفرداً مع الإبقاء على الخرطوم السليم المتوافق. تصميم مقبض الضغط يضع تشغيل الرش تحت تحكم اليد. مواصفات هذا المنتج رأس منفرد تصميم زاوية مقبض ضغط خلفي كروم الاستخدامات العملية استبدال رأس شطاف صيانة تجهيزات الحمام التجهيز والاستخدام والعناية طابق وصلة الرأس مع الخرطوم وضع جلدة الإحكام، ثم ثبته وافحص التسرب. أغلق محبس التغذية بعد الاستخدام. سؤال قبل الشراء هل المنتج طقم كامل مع خرطوم؟ هذا رأس شطاف منفرد؛ يستخدم مع خرطوم وحامل متوافقين في موقع التركيب. اطلبه من بشيتي ستورز تجد هذا المنتج لدى شركة يوسف البشيتي في الأردن ضمن الادوات الصحية ← الشطافات. اجمع احتياجاتك من القسم نفسه، واختر الكمية ثم أضف المنتج إلى السلة. لطلبات تجهيز المشاريع والورش أو الكميات، تواصل مع فريق بشيتي ستورز لتنسيق احتياجات الطلب.
1.900 JD
-
NEW STAR New Star Single Chrome Bidet Head with Straight Cylindrical Design and Top Press Handle
رأس شطاف كروم مستقيم نيو ستار استبدل رأس الشطاف منفرداً مع الإبقاء على الخرطوم السليم المتوافق. تصميم مقبض الضغط يضع تشغيل الرش تحت تحكم اليد. مواصفات هذا المنتج رأس منفرد تصميم أسطواني مستقيم مقبض ضغط علوي الاستخدامات العملية استبدال رأس شطاف صيانة تجهيزات الحمام التجهيز والاستخدام والعناية طابق وصلة الرأس مع الخرطوم وضع جلدة الإحكام، ثم ثبته وافحص التسرب. أغلق محبس التغذية بعد الاستخدام. سؤال قبل الشراء هل المنتج طقم كامل مع خرطوم؟ هذا رأس شطاف منفرد؛ يستخدم مع خرطوم وحامل متوافقين في موقع التركيب. اطلبه من بشيتي ستورز تجد هذا المنتج لدى شركة يوسف البشيتي في الأردن ضمن الادوات الصحية ← الشطافات. اجمع احتياجاتك من القسم نفسه، واختر الكمية ثم أضف المنتج إلى السلة. لطلبات تجهيز المشاريع والورش أو الكميات، تواصل مع فريق بشيتي ستورز لتنسيق احتياجات الطلب.
1.500 JD
-
JADEVER رأس مشعل غاز مع شعلة من جاديفر JDFG1604
رأس مشعل غاز مع شعلة من جاديفر رأس مشعل غاز مع شعلة من جاديفر JDFG1604 مخصص لـالتسخين الموضعي بمشعل غاز متوافق. يساعد رأس المشعل على توجيه اللهب إلى نقطة العمل في التطبيقات التي تسمح باستخدام لهب مباشر. المواصفات والتجهيز العلامة التجارية: JADEVER — جاديفر. رقم الموديل: JDFG1604. رأس مشعل غاز مع شعلة. اختيار عملي لمهمتك اختر هذا المنتج عندما تحتاج إلى التسخين الموضعي بمشعل غاز متوافق. راجع المقاس أو التجهيز الموضح، وطابقه مع القطعة التي تعمل عليها قبل الطلب، حتى تحصل على الأداة المناسبة للعمل من البداية. إرشادات الاختيار والاستخدام طابق خرطوشة الغاز ووصلة الرأس، وافحص التسرب بعيدًا عن الاشتعال. اعمل بتهوية مناسبة وبعيدًا عن المواد القابلة للاشتعال. سؤال شائع: هل يركب على أي عبوة غاز؟ يجب تطابق نوع الوصلة والغاز مع المشعل؛ لا تستخدم محولات غير معتمدة. جاديفر لدى يوسف البشيتي اطلب رأس مشعل غاز مع شعلة من بشيتي ستورز ضمن قسم العدد اليدوية وفئة اكسسوارات عدد. في يوسف البشيتي بالبيادر، عمّان، يمكنك تجهيز احتياجات الصيانة والعمل ومقارنة ملحقات الفئة لاختيار ما يناسب مشروعك. للتجهيز بكميات للمحلات والورش، تواصل مع فريق المتجر وحدد رقم الموديل والكمية المطلوبة.
5.000 JD 3.990 JD
-
JADEVER رأس مشعل غاز يدوي من جاديفر JDFG2602
رأس مشعل غاز يدوي من جاديفر رأس مشعل غاز يدوي من جاديفر JDFG2602 مخصص لـالتسخين الموضعي بمشعل غاز متوافق. يساعد رأس المشعل على توجيه اللهب إلى نقطة العمل في التطبيقات التي تسمح باستخدام لهب مباشر. المواصفات والتجهيز العلامة التجارية: JADEVER — جاديفر. رقم الموديل: JDFG2602. رأس مشعل غاز يدوي. اختيار عملي لمهمتك اختر هذا المنتج عندما تحتاج إلى التسخين الموضعي بمشعل غاز متوافق. راجع المقاس أو التجهيز الموضح، وطابقه مع القطعة التي تعمل عليها قبل الطلب، حتى تحصل على الأداة المناسبة للعمل من البداية. إرشادات الاختيار والاستخدام طابق خرطوشة الغاز ووصلة الرأس، وافحص التسرب بعيدًا عن الاشتعال. اعمل بتهوية مناسبة وبعيدًا عن المواد القابلة للاشتعال. سؤال شائع: هل يركب على أي عبوة غاز؟ يجب تطابق نوع الوصلة والغاز مع المشعل؛ لا تستخدم محولات غير معتمدة. جاديفر لدى يوسف البشيتي اطلب رأس مشعل غاز يدوي من بشيتي ستورز ضمن قسم العدد اليدوية وفئة اكسسوارات عدد. في يوسف البشيتي بالبيادر، عمّان، يمكنك تجهيز احتياجات الصيانة والعمل ومقارنة ملحقات الفئة لاختيار ما يناسب مشروعك. للتجهيز بكميات للمحلات والورش، تواصل مع فريق المتجر وحدد رقم الموديل والكمية المطلوبة.
3.000 JD
-
TOTAL Total PH2 Screwdriver Bits 50mm | TACIM16PH223
Prepare the Phillips screws with a bit that matches the head recess and keep them straight while tightening or loosening. Specifications and Equipment PH2 head 50 mm length Black color Brand: TOTAL Model number: TACIM16PH223 Selection and Usage Guide Start by matching the diameter and fastening system with your device, then select the appropriate accessory for the material. Check the permitted speed and secure the workpiece before operation, and disconnect the power when installing or replacing. Order TOTAL PH2 screwdriver bits, 50 mm long, from Al-Bashiti — Al-Bashiti Stores in Jordan. Use the model number when inquiring to identify the item and accurately compare its specifications with your needs.
4.500 JD
-
TOTAL Impact Torsion PH2 Bits, 150mm | TACIM16PH263
Reach recessed screws with a long impact screwdriver bit, ensuring the bit is seated inside the screw recess before starting to drive. Specifications and Features Length: 150 mm Head: PH2 1/4-inch hex shank S2 material Brand: TOTAL Model number: TACIM16PH263 Selection and Usage Guide Choose the size and head shape that match the fastener to minimize slippage and edge damage. Seat the bit fully before applying force, and verify the compatibility of the accessory shank or drive square with your tool. Use the operating mode appropriate for the bit's rating. Order TOTAL PH2 150mm impact bits from Al-Bashiti — Al-Bashiti Stores in Jordan. Use the model number when inquiring to identify the item and accurately compare its specifications with your needs.
9.990 JD
-
Goldblatt Goldblatt Plastic Rasp (G15355)
The Drywall Sander Head – Model G15355 – is a durable yet lightweight tool from Goldblatt designed to facilitate high-reach sanding operations. Thanks to its engineered design, this head gives you the ability to reach ceilings and high walls with complete flexibility and long-lasting professional performance. Professional Features and Benefits: Two-Piece Design for Added Strength: The structure features a two-piece design to enhance durability and the ability to withstand pressure during heavy work without breaking or bending. Lightweight and Highly Durable: Materials have been carefully selected to make the head light enough to reduce shoulder and neck strain when working on ceilings, while maintaining the rigidity of S2 Steel. Universal Handle Compatibility: The head is compatible with all standard broom handles and is specifically designed to work perfectly with the Goldblatt G16340 5-foot handle. Chamfered Drive End: The connection end features a chamfered design, allowing for quick and easy attachment and detachment of the handle, saving time on the job site. Flexible Sandpaper Compatibility: This head is designed to work efficiently with most types of die-cut sanding paper and screen, ensuring stable paper placement and even distribution over the surface. Technical Specifications for Model G15355: Model Number: G15355. Product Type: Sander Head. Material: S2 Steel for maximum strength. Power Source: Manual. Compatibility: Attaches to standard handles (compatible with Model G16340). UPC: 084389153557. Why Choose the G15355 Sander Head? Reliability: A highly durable product designed to serve professionals in the toughest conditions, ensuring a level surface and preventing undulations during sanding. Flexibility: The ability to attach any handle you have makes it an economical and practical tool on all construction and renovation sites. Technical Tip: For best results in corners, make sure the sandpaper is tightly secured to the base. After use, it is preferable to wipe the movable joint with a dry cloth to ensure the head's smooth movement next time.
5.420 JD
-
1.750 JD
-
1.000 JD
-
Bison 3 Gryphon Spatulas (7005120)
Griffon Multi Nozzle® – is a professional nozzle equipped with 4 outlets that can be opened as needed, with a side guiding probe to ensure accuracy. It is specially designed to facilitate the application of mounting adhesive on large areas and long surfaces with high efficiency and optimal distribution. Key Features: Ability to customize the number and openings of outlets based on project requirements. Precise geometric distribution: 20 mm distance between openings to ensure even coverage. Side guiding probe allows for precise adhesive application along edges. Total width up to 80 mm, which speeds up the application process on wide surfaces. Compatible with all standard S15 threaded cartridges. Ensures an "optimal dose," reducing material waste. Technical Specifications: Product Name: Griffon Multi Nozzle. Product Number: 7005120. Color: Black. Function: Applies up to 4 parallel adhesive lines simultaneously. Applications and Uses: Ideal for: Installing large wall panels, wide floor edgings, and long finishing strips. Efficiency: Increases work speed in projects requiring large quantities of regularly distributed adhesive. Usage Tip: Use a sharp knife to open only the desired outlets. Start by pressing the cartridge until the adhesive flows evenly from all open outlets, then begin sweeping across the surface using the guiding probe to maintain the distance from the edge.
17.000 JD
-
WORKPRO Cross head screwdriver 10 cm, 10 pcs, by WorkPro (WP408130)
The WORKPRO Magnetic Impact Torsion Bit – Model WP408130 – is the advanced generation of screwdriver bits specifically designed to handle the extreme torque of impact drivers. It features "Torsion Zone" technology that absorbs impact energy, preventing bit breakage and extending its lifespan remarkably compared to ordinary bits. Professional Features and Benefits: Torsion Technology: The middle section of the bit is designed to twist slightly when torque peaks, reducing stress on the bit tip and preventing breakage or cam-out from the screw. Strong Magnetism and High Stability: The bit is equipped with excellent magnetic properties that help securely hold screws, allowing for easy one-handed operation, especially in elevated or tight spaces. Precise PH2 Design: The tip is manufactured with extreme precision to fit the most common Phillips #2 screws, ensuring a perfect fit and reducing cam-out. Extra Length (100mm): The extra length (100mm) provides superior access to deep screws or those located behind obstacles, and offers a clearer view of the fastening location. Impact-Specific Steel: Made from high-quality alloy steel and heat-treated to withstand the repeated impacts of powerful cordless tools. Legal Information and Specifications (WP408130): Product Name: WorkPro Magnetic Impact Torsion Bit. Model Number: WP408130. Bit Type: PH2 (Phillips). Length: 100mm. Country of Origin: China. Manufacturer: GREATSTAR. Special Features: Impact-resistant, magnetic, torque absorption zone. Why choose this model (100mm
9.000 JD
-
CROWN CROWN CT39011 3-Ton Aluminum Crocodile Car Jack | Bashiti Stores
CROWN CT39011 3-Ton Aluminum Floor Jack from Bashiti Stores A professional choice from the CROWN brand, available at Al-Bashiti – Bashiti Stores for workshops, warehouses, projects, and professional use according to the product's nature. Specifications and Features Maximum lifting capacity of 3 tons. Industrial aluminum frame combining durability and ease of movement. Rapid lift system to reduce time and effort in the workshop. Wide support base and durable wheels for enhanced stability and maneuverability. Model CT39011 from CROWN. Why buy it from Bashiti Stores? Clear specifications to help you choose the right product. A practical solution that contributes to completing work efficiently and reducing time and effort. Available from Al-Bashiti with reliable service and an easy shopping experience. Advice before buying: Match the load, size, or measurement range with your work requirements, and adhere to the product's operating and safety instructions. Order the CROWN CT39011 3-Ton Aluminum Floor Jack now from Bashiti Stores – Al-Bashiti.
130.000 JD
-
CROWN 2 Ton Hydraulic Engine Crane CROWN CT39012 | Bashiti Stores
CROWN CT39012 2-Ton Hydraulic Engine Crane by Bashiti Stores A professional choice from the CROWN brand, available at Al-Bashiti – Bashiti Stores for workshops, warehouses, projects, and professional use, depending on the nature of the product. Specifications and Features Maximum lifting capacity of 2 tons. Maximum lifting height of up to 1890 mm. Long arm and hydraulic design for smooth lifting. Sturdy metal base and movable legs for maneuvering inside the workshop. CROWN model CT39012. Why buy it from Bashiti Stores? Clear specifications to help you choose the right product. A practical solution that contributes to completing work efficiently while reducing time and effort. Available from Al-Bashiti with reliable service and an easy purchasing experience. Advice before buying: Match the load capacity, size, or measurement range with your work requirements, and adhere to the product's operating and safety instructions. Order the CROWN CT39012 2-Ton Hydraulic Engine Crane now from Bashiti Stores – Al-Bashiti.
260.000 JD
-
Crown Crown Router 1100W | CT11002
Description:The Crown CT11002 Plunge Router is a versatile tool designed for precise woodworking tasks, including carving, grooving, and shaping materials. Key Features: Variable speed control for optimal performance on various materials. Soft start to prevent sudden jolts upon activation. Constant speed control system to maintain consistent performance under load. Plunge depth control system for precise results. Integrated dust extraction system to keep the workspace clean. Specifications: Power Input: 1400 W No-load Speed: 9000-28000 rpm Collet Diameter: 12 mm Plunge Depth: Up to 50 mm Weight: 4.2 kg Dimensions: 20.6 × 30.2 × 31.2 cm Voltage: 220-230 V Amperage: 6 Amps Material: Metal Color Options: Multi-color Power Source: Corded Electric
80.000 JD
-
WORKPRO Router 6 mm from Workpro (WP473006)
The WORKPRO wood edge trimmer machine — Model WP473006, is ideal for professional woodworking tasks such as edge trimming, laminate cutting, end finishing, and high-precision furniture manufacturing. It is characterized by its light weight and ease of control, making it suitable for workshops and professionals. Kit Contents: WORKPRO WP473006 Laminate Trimmer device Transparent base for clear visibility Height adjustment key Maintenance key / Tighten Wrench Trimmer bit (if included) Features: Lightweight and easy-to-control design for high-precision edge trimming. Transparent base provides better visibility during operation. Excellent cutting depth control with an easy and fast adjustment system. Suitable for wood, MDF, laminate, and plywood. Powerful motor ensures smooth and consistent cutting without vibrations. Technical Specifications (Expected): Model WP473006 Brand WORKPRO Device Type Laminate Trimmer – Edge Trimmer Machine Power Expected 500–600W No-load Speed Expected 28000–30000 RPM Collet Diameter 6 mm or 6.35 mm (1/4") Cutting Depth 0–20 mm (approx.) Usage Edge trimming – MDF – Wood – Laminate – Furniture manufacturing
48.350 JD
-
Crown Router Charger without batteries and charger 20V Crown | CT26010HX
Description:The Crown CT26010HX Cordless Router is designed for professional woodworking tasks, offering freedom of movement and high precision without the limitations of cords. Key Features: Powered by a 20V Max battery for extended runtime without memory effect. Brushless motor ensures higher efficiency, durability, and less maintenance. Variable no-load speed ranging from 10,000 to 30,000 RPM to suit various routing applications. Compatible with 6mm and 8mm collets, offering flexibility in using different router bits. Integrated LED light to improve visibility in low-light conditions. Specifications: Dimensions: Approximately 24.3 × 19 × 14.5 cm Weight: 2 kg Material: High-quality materials to ensure durability Color Options: Standard industrial gray and black design Power Requirements: Operates with a 20V Max battery (battery and charger may be sold separately) Other Specifications: Router base with 20mm movement, compatible with Crown batteries CAB202013XE, CAB204014XE, CAB204015XE, CAB205014XE, CAB208016XE
85.000 JD
-
Crown Crown Router 430W | CT11020
Description: The CROWN CT11020 router is a compact and efficient tool designed for precise woodworking tasks. Key Features: 430W power No-load speed up to 26,000 RPM Collet diameter 6mm Plunge depth 30mm Spindle lock for easy bit changes Plunge depth control system Lock-on function for continuous operation Dust extraction system for a clean workspace Specifications: Dimensions: 25 x 21 x 12.5 cm (packaging) Weight: 1.5 kg Power Requirements: 220-230V, 2.1A Other Specifications: EAN Code: 7640177421753
45.000 JD
-
Crown Electric Router 710W Crown | CT11023
Description: The CROWN CT11023S hand router is compact and lightweight, designed for precise woodworking tasks. Key Features: 710W power Variable no-load speed from 13,000 to 33,000 rpm Collet diameter 6/8 mm Plunge depth 20 mm Specifications: Dimensions: 34 x 23 x 20 cm (packaging) Weight: 1.45 kg Power requirements: 220-230V, 3.4A Other specs: EAN code: 7640186244237
77.000 JD
-
WORKPRO Reamer for WorkPro (WP309006)
The WORKPRO WP309006 deburring tool is a compact and durable pipe reamer, designed to remove burrs and finish the internal and external edges of pipes. It is suitable for various materials, ensuring smooth finishes for perfect pipe installation. Key Features: Dual-function design for internal and external reaming Durable plastic body with hardened steel blades Suitable for copper, aluminum, brass, PVC, and PPR pipes Compact size for easy handling and storage Efficiently removes burrs to prevent pipe damage Specifications: Dimensions: Approximately 40 mm (1.6 inches) diameter x 46 mm (1.8 inches) height Weight: Approximately 50 grams Material: Plastic body with alloy steel blades Color Options: Red Power Requirements: Manual operation Other Specifications: Suitable for pipe sizes ranging from 3/16 inch to 1-1/4 inches
5.850 JD
-
YBS Plant wire tie 2.5 mm * 10 m YBS | Bashiti Stores
YBS 2.5mm * 10m Plant Wire Tie from Bashiti Stores A product by the brand YBS, available at Bashiti – Bashiti Stores within our plant fastening tools category, suitable for professionals, workshop owners, projects, and uses that align with the listed specifications. Specifications and Benefits The wire reel can be cut to any size according to your growth needs and provides reliable support where you need it most. Easy to unwind and cut with scissors. This versatile garden wire is ideal for tying, securing, training, and supporting plants. Very useful for binding wire mesh, making nets, or creating cages used as traps or supports for climbing plants. Used for bundling and organizing wires, cables, power cords, food bags, etc., to keep your space neat and tidy. Color: Green. Diameter: 2mm Total length: 20m, 10m each. Why choose it from Bashiti Stores? A practical choice for maintenance work and projects. Categorized under plant fastening tools for easy access. Available from Bashiti with reliable service and an easy shopping experience. Pre-purchase tip: Match the size, capacity, and accessories mentioned with the nature of your work to ensure the best result. Order the YBS 2.5mm * 10m Plant Wire Tie now from Bashiti Stores – Bashiti and get a carefully selected product to serve your work efficiently.
1.500 JD
-
YBS YBS Sisal Rope | Beshty Stores
YBS Fiber Rope Bundle by Bashiti Stores A product from the YBS brand, available at Al-Bashiti – Bashiti Stores within the fiber ropes category. It is suitable for professionals, workshop owners, projects, and uses that align with the listed specifications. Specifications and Benefits Natural jute fiber rope Suitable for tying plants, gardening projects, and crafts Useful for flower arrangement, packaging, and rustic decorations Why choose it from Bashiti Stores? A practical choice for maintenance work and projects Categorized under fiber ropes for easy access Available from Al-Bashiti with reliable service and an easy shopping experience Pre-purchase advice: Match the mentioned size, capacity, and accessories with the nature of your work to ensure the best results. Order the YBS fiber rope bundle now from Bashiti Stores – Al-Bashiti and get a carefully selected product to serve your work efficiently.
0.900 JD
You have seen 1560 out of 6208 products