Schneider 25A 1P MCB R9F32125 is an option among the MCB automatic circuit breakers at Bashiti Stores, designed for circuit protection against overloads and short circuits. In this version, the rated current is 25 Amps and the number of poles is 1P. These specifications distinguish this model from other alternatives in the same series; match them with your circuit requirements and do not choose a higher-amperage breaker just to increase the operating margin.
Practical Benefits
- Combines overload and short-circuit tripping functions in a single modular device.
- Distributing protection across independent circuits helps organize the distribution board and identify the affected circuit in the event of a fault.
- Choosing the correct current, number of poles, and tripping curve provides the basis for aligning the breaker with the circuit requirements.
Technical Specifications for this Model
| Brand |
Schneider Electric |
| Series |
Resi9 |
| Model Reference |
R9F32125 |
| Rated Current |
25 A |
| Number of Poles |
1P |
| Tripping Curve |
C |
| Breaking Capacity as per source title |
4.5kA |
| Stated Operating Voltage |
230VAC |
| Dimensions: W x H x D |
18 x 81 x 72 mm |
| Stated Mounting |
DIN Rail |
Who needs this product?
Electricians, installation contractors, and homeowners or shop owners who are setting up a new distribution board or replacing a breaker that matches an existing circuit. Selection depends on the circuit design, cable cross-section, and installation method, not just the device type or breaker shape.
Installation and Verification Method — For Professional Technicians
The following steps outline the general work sequence. Use the manufacturer's diagram for reference R9F32125 to determine terminals and tightening torque values. Do not work on a circuit connected to the power supply.
- The technician disconnects all power sources, secures them against accidental restart, and verifies the absence of voltage with a suitable tool.
- Matches the device reference, number of poles, current, and voltage with the board schematic, and reviews conductor cross-sections and protection coordination.
- Mounts the device onto the rail or its designated position after ensuring compatibility, and identifies the supply and output from the manufacturer's diagram for this reference.
- Executes the connections using the tightening torque, stripping length, and wire gauges specified in the model manual; do not transfer these values from a similar device.
- Checks the integrity of the mounting and connection, closes the covers, and performs the required functional and protection tests before handing over the circuit.
Frequently Asked Questions Before Buying
Does this breaker protect against earth leakage?
An MCB is designed for overload and short-circuit protection and does not replace earth leakage protection. Review the need for an RCCB or RCBO within the board design.
Should I replace a breaker that trips constantly with one of a higher amperage?
No. You must first identify the cause of the tripping and inspect the load, cable, and connections. Increasing the amperage without study may leave the wires without proper protection.
What is the difference between Amperage and Breaking Capacity?
Amperage is the rated current of the breaker, while breaking capacity describes the level of short-circuit current it can interrupt under specified voltage and standard conditions. Do not substitute one for the other.
Order from Bashiti Stores
Learn more in the Electrical Section and Circuit Breakers category. Bashiti Stores — Yousef Bashiti Co., serving individuals, companies, and projects in Jordan. For inquiries about the product and quantities, contact 0795756898 or visit our Bayader and Wahdat branches in Amman.
For comparison within the category
Also check out the Schneider 32A 1P MCB R9F32132, and compare specifications to choose what suits your needs.
