Schneider 32A 3P MCB A9K24332 is an option within the MCB automatic circuit breakers at Bashiti Stores, designed to protect the circuit from overloads and short circuits. In this option, the rated current is 32 Amps and the number of poles is 3P. These specifications distinguish the model from other alternatives in the same series; match them with your circuit requirements and do not select a breaker with a higher current just to increase the operating margin.
Practical Benefits
- Combines overload and short-circuit protection functions in a single modular device.
- Distributing protection across independent circuits helps organize the panel and identify the affected circuit when a fault occurs.
- Selecting the correct current, number of poles, and tripping curve provides the basis for aligning the breaker with the circuit requirements.
Technical Specifications for This Model
| Brand |
Schneider Electric |
| Series |
Acti9 iK60N |
| Model Reference |
A9K24332 |
| Rated Current |
32 A |
| Number of Poles |
3P |
| Tripping Curve |
C |
Breaking Capacity per Source Title |
6kA |
| Stated Operating Voltage |
400VAC |
| Dimensions: W x H x D |
54 x 85 x 78.5 mm |
| Stated Mounting |
DIN Rail |
Who Needs This Product?
Electricians, wiring contractors, and homeowners or shop owners who are setting up a new panel or replacing a breaker that matches the existing circuit. The choice depends on the circuit design, cable cross-section, and installation method, not just the device type or breaker shape.
Installation and Verification Method — For Professional Technicians
The following steps illustrate the general work sequence; the manufacturer's diagram for reference A9K24332 must be used to determine terminals and torque values. Do not perform work on a circuit connected to a power supply.
- The technician disconnects all power sources and secures them against accidental reconnection, then verifies the absence of voltage with a suitable tool.
- Matches the device reference, number of poles, current, and voltage with the panel diagram, and reviews the conductor cross-section and protection coordination.
- Installs the component on the rail or its designated position after ensuring compatibility, and identifies the supply and output from the manufacturer's diagram for this reference.
- Executes the connections using the tightening torque, stripping length, and wire cross-sections specified in the model manual; do not carry these values over from a similar device.
- Checks the security of the installation and connections, then closes the covers and conducts the required operational and protection tests before handing over the circuit.
Frequently Asked Questions Before Buying
Does this breaker protect against earth leakage?
An MCB is intended for overload and short-circuit protection and does not substitute for earth leakage protection. The need for an RCCB or RCBO should be reviewed within the panel design.
Should I replace a breaker that trips constantly with one having higher Amperage?
No. First, identify the cause of the tripping and check the load, cable, and connections. Increasing the amperage without analysis may leave the wires without proper protection.
What is the difference between Amperage and breaking capacity?
Amperage is the rated current of the breaker, while breaking capacity describes the level of short-circuit current it can interrupt under specified voltage and standard conditions. Do not swap one for the other.
Order from Bashiti Stores
Learn more in the Electrical Section and Circuit Breakers category. Bashiti Stores — Yousef Bashiti Co., serving individuals, companies, and projects in Jordan. For product and quantity inquiries, contact 0795756898 or visit our Bayader and Wehdat branches in Amman.
For Comparison Within the Category
Also, check out the Schneider 40A 3P MCB A9K24340, and compare specifications to choose what suits your needs.
