Schneider MCB 6A 2P R9F32206 is an option among MCB automatic circuit breakers at Bashiti Stores, designed to protect circuits from overloads and short circuits. In this option, the rated current is 6 amperes and the number of poles is 2P. These specifications distinguish this model from other alternatives in the same series; match them with circuit requirements and do not choose a higher amperage breaker just to increase the operating margin.
Practical Benefits
- Combines the functions of tripping on overload and short circuit into a single standard device.
- Distributing protection across independent circuits helps organize the distribution board and identify the affected circuit when a fault occurs.
- Selecting the correct current, number of poles, and tripping curve provides a foundation for matching the breaker with circuit requirements.
Technical Specifications for This Model
| Brand |
Schneider Electric |
| Series |
Resi9 |
| Model Reference |
R9F32206 |
| Rated Current |
6 A |
| Number of Poles |
2P |
| Tripping Curve |
C |
| Breaking Capacity as per source |
4.5kA |
| Stated Operating Voltage |
400VAC |
| Dimensions: W x H x D |
36 x 81 x 72 mm |
| Mounting |
DIN Rail |
Who Needs This Product?
Electricians, installation contractors, and home or shop owners who are setting up a new panel or replacing a breaker matching an existing circuit. Selection depends on the circuit design, cable cross-section, and installation method, not just on the device type or the breaker's appearance alone.
Installation and Verification — For Qualified Technicians
The following steps outline the general work sequence; the manufacturer's diagram for reference R9F32206 must be used to identify terminals and tightening values. Never perform work on a circuit connected to power.
- The technician disconnects all power sources and secures them against accidental reactivation, then verifies the absence of voltage using an appropriate tool.
- Matches the device reference, number of poles, current, and voltage with the panel diagram, and reviews conductor cross-section and protection coordination.
- Mounts the unit on the rail or its designated position after ensuring compatibility, and identifies supply and output from the manufacturer's diagram for this reference.
- Performs connections with the tightening torque, stripping length, and wire gauges specified in the model manual; do not transfer these values from a similar device.
- Checks the integrity of the mounting and connections, then closes the covers and conducts required operational and protection tests before handing over the circuit.
-
Frequently Asked Questions Before Buying
Does this breaker protect against earth leakage?
An MCB is designed for overload and short circuit protection and does not replace earth leakage protection. The need for an RCCB or RCBO should be reviewed within the panel design.
Should I replace a frequently tripping breaker with a higher amperage one?
No. You must first identify the cause of the tripping and inspect the load, cable, and connections. Increasing the amperage without analysis could leave the wires without appropriate protection.
What is the difference between amperage and breaking capacity?
Amperage is the rated current of the breaker, while breaking capacity describes the level of short-circuit current it can safely disconnect under specified voltage and standard conditions. Do not substitute one for the other.
Order from Bashiti Stores
Discover more in the Electrical Department and Circuit Breakers section. Bashiti Stores — Yousef Bashiti Company, serving individuals, companies, and projects in Jordan. For inquiries about the product and quantities, contact 0795756898 or visit our Bayader and Wahdat branches in Amman.
For Comparison Within the Category
Also, check out the Schneider MCB 10A 2P R9F32210 and compare specifications to choose what suits your needs.
