Schneider MCB 16A 2P R9F32216 is an option within the MCB automatic circuit breakers at Bashiti Stores, designed to protect circuits from overloads and short circuits. In this version, the rated current is 16A and it features 2 poles (2P). These specifications distinguish this model from other alternatives in the same series; match them with your circuit requirements and do not choose a breaker with a higher current rating simply to increase the operating margin.
Practical Benefits
- Combines overload and short-circuit tripping functions in a single modular device.
- Distributing protection across independent circuits helps organize the panel and identify the affected circuit in the event of a fault.
- Choosing the correct current, number of poles, and tripping curve provides the basis for aligning the breaker with circuit requirements.
Technical Specifications for this Model
| Brand |
Schneider Electric |
| Series |
Resi9 |
| Model Reference |
R9F32216 |
| Rated Current |
16 A |
| Number of Poles |
2P |
| Tripping Curve |
C |
| Breaking Capacity as per Source Header |
4.5kA |
| Stated Operating Voltage |
400VAC |
| Dimensions: W x H x D |
36 x 81 x 72 mm |
| Stated Mounting |
DIN Rail |
Who Needs This Product?
Electricians, installation contractors, and homeowners or shop owners who are setting up a new panel or replacing a breaker that matches an existing circuit. The choice depends on the circuit design, cable cross-section, and installation method, not merely on the device type or the breaker's appearance.
Installation and Verification Method — For Professional Technicians
The following steps outline the general workflow. The manufacturer's diagram for reference R9F32216 must be used to identify terminals and torque values. Do not perform work on a circuit connected to a power supply.
- The technician disconnects all power sources and secures them against accidental restart, then verifies the absence of voltage using an appropriate tool.
- Match the device reference, number of poles, current, and voltage with the panel diagram, and verify the conductor cross-section and protection coordination.
- Mount the unit on the rail or its designated position after ensuring compatibility, and identify the supply and output from the manufacturer's diagram for this reference.
- Perform connections using the tightening torque, stripping length, and wire gauges specified in the model manual; do not carry over these values from a similar device.
- Check the tightness of the mounting and connections, then close the covers and conduct the required operational and protection tests before handing over the circuit.
Frequently Asked Questions Before Buying
Does this breaker protect against earth leakage?
An MCB is designed for overload and short-circuit protection and does not replace the need for earth leakage protection. The necessity for an RCCB or RCBO should be reviewed within the panel design.
Should I replace a breaker that trips constantly with one having a higher amperage?
No. You must first identify the cause of the tripping and inspect the load, cable, and connections. Increasing the amperage without analysis may leave the wires without proper protection.
What is the difference between Amperage and Breaking Capacity?
Amperage is the rated current of the breaker, whereas breaking capacity describes the level of short-circuit current it can safely interrupt under specified voltage and standard conditions. Do not substitute one figure for the other.
Order from Bashiti Stores
Learn more in the Electrical Section and Circuit Breakers category. Bashiti Stores — Yousef Bashiti Co., serving individuals, companies, and projects in Jordan. For inquiries about the product and quantities, contact 0795756898 or visit our Bayader and Wahdat branches in Amman.
For Comparison Within the Category
Also, check out the Schneider MCB 20A 2P R9F32220 and compare the specifications to choose what fits your needs.
