Schneider MCB 6A 3P R9F32306 is an option within the MCB circuit breakers at Bashiti Stores, designed to protect circuits from overloads and short circuits. In this option, the rated current is 6 Amps and the number of poles is 3P. These specifications distinguish this model from other alternatives in the same series; match them with your circuit requirements and do not choose a higher current breaker just to increase the operating margin.
Practical Benefits
- Combines the functions of overload and short-circuit protection in a single standard device.
- Distributing protection across independent circuits helps organize the distribution board and identify the affected circuit in the event of a fault.
- Choosing the correct current, number of poles, and tripping curve provides the basis for aligning the breaker with the circuit requirements.
Technical Specifications for this Model
| Brand |
Schneider Electric |
| Series |
Resi9 |
| Model Reference |
R9F32306 |
| Rated Current |
6 A |
| Number of Poles |
3P |
| Tripping Curve |
C |
| Breaking Capacity per Source Title |
4.5kA |
| Stated Operating Voltage |
400VAC |
| Dimensions: Width x Height x Depth |
54 x 81 x 72 mm |
| Mounting |
DIN rail |
Who needs this product?
Electricians, wiring contractors, and homeowners or shop owners who are setting up a new distribution board or replacing a breaker that matches an existing circuit. The selection depends on the circuit design, cable cross-section, and installation method, not just on the type of device or the shape of the breaker.
Installation and Verification Method — For Licensed Technicians
The following steps outline the general workflow; use the manufacturer's diagram for reference R9F32306 to determine terminals and torque values. Do not perform work on a circuit connected to power.
- The technician disconnects all power sources and secures them against accidental reconnection, then verifies the absence of voltage with a suitable tool.
- Matches the device reference, number of poles, current, and voltage with the board diagram, and reviews conductor cross-sections and protection coordination.
- Mounts the unit on the rail or its designated position after verifying compatibility, and identifies the supply and output from the manufacturer's diagram for this reference.
- Executes connections using the torque, stripping length, and wire gauges specified in the model manual; do not carry over these values from a similar device.
- Checks the integrity of the mounting and connections, closes the covers, and performs the required functional and protection tests before handing over the circuit.
Frequently Asked Questions Before Buying
Does this breaker protect against earth leakage?
An MCB is intended for overload and short-circuit protection and does not replace earth leakage protection. The need for an RCCB or RCBO should be reviewed within the board design.
Should I replace a frequently tripping breaker with a higher amperage one?
No. You must first identify the cause of the tripping and inspect the load, cables, and connections. Increasing the amperage without study may leave the wires without proper protection.
What is the difference between Amperage and Breaking Capacity?
Amperage is the rated current of the breaker, while breaking capacity describes the level of short-circuit current it can safely interrupt under specified voltage and standard conditions. These two numbers are not interchangeable.
Order from Bashiti Stores
Learn more in the Electrical Department and Circuit Breakers section. Bashiti Stores — Yousef Bashiti Company, serving individuals, companies, and projects in Jordan. For inquiries about the product and quantities, contact 0795756898 or visit our Bayader and Wahdat branches in Amman.
For comparison within the category
Also check out the Schneider MCB 10A 3P R9F32310 and compare specifications to choose what suits your needs.
