Schneider MCB 32A 1P A9F74132 is an option within the MCB automatic circuit breakers at Bashiti Stores, designed to protect the circuit against overloads and short circuits. In this option, the rated current is 32 Amps and the number of poles is 1P. This data distinguishes this model from other alternatives in the same series; match it with circuit requirements and do not choose a higher amperage breaker simply to increase the operating margin.
Practical Benefits
- Combines overload and short-circuit tripping functions into one standard device.
- Distributing protection across independent circuits helps organize the panel and identify the affected circuit when a fault occurs.
- Selecting the correct current, number of poles, and tripping curve provides the basis for aligning the breaker with circuit requirements.
Technical Specifications for This Model
| Brand |
Schneider Electric |
| Series |
Acti9 iC60N |
| Model Reference |
A9F74132 |
| Rated Current |
32 A |
| Number of Poles |
1P |
| Tripping Curve |
C |
| Breaking Capacity per Source Title |
6kA per IEC/EN 60898-1 and 10kA per IEC/EN 60947-2; check voltage conditions in the manual |
| Dimensions: W × H × D |
18 × 85 × 78.5 mm |
| Stated Mounting |
DIN rail |
Who Needs This Product?
Electricians, wiring contractors, and homeowners or shop owners who are setting up a new panel or replacing a breaker that matches an existing circuit. Selection depends on the circuit design, cable cross-section, and method of installation, not just on the device type or the appearance of the breaker.
Installation and Verification Method — For Professional Technicians
The following steps outline the general workflow; the manufacturer's diagram for reference A9F74132 must be used to identify terminals and torque values. Do not perform work on a circuit connected to power.
- The technician disconnects all power sources and secures them against accidental reconnection, then verifies the absence of voltage with a suitable tool.
- Matches the device reference, number of poles, current, and voltage with the panel diagram, and reviews conductor cross-sections and protection coordination.
- Installs the unit on the rail or its designated position after ensuring compatibility, and identifies the supply and load side from the manufacturer's diagram for this reference.
- Performs connections using the tightening torque, stripping length, and wire gauges specified in the model manual; do not transfer these values from a similar device.
- Checks the integrity of the installation and connections, then closes the covers and conducts the required operational and protection tests before handing over the circuit.
Frequently Asked Questions Before Buying
Does this breaker protect against earth leakage?
An MCB is intended for overload and short-circuit protection and does not replace earth leakage protection. Review the need for an RCCB or RCBO within the panel design.
Should I replace a breaker that trips constantly with one of a higher amperage?
No. You must first identify the cause of the tripping and inspect the load, cables, and connections. Increasing the amperage without study may leave the wires without appropriate protection.
What is the difference between amperage and breaking capacity?
Amperage is the rated current of the breaker, while breaking capacity describes the level of short-circuit current it can interrupt within specified voltage and standard conditions. Do not substitute one for the other.
Order from Bashiti Stores
Learn more in the Electrical Section and Circuit Breakers category. Bashiti Stores — Yousef Bashiti Co., serving individuals, companies, and projects in Jordan. For inquiries about the product and quantities, contact 0795756898 or visit our Bayader and Wahdat branches in Amman.
For Comparison Within the Category
Also check out the Schneider MCB 40A 1P A9F74140, and compare the specifications to choose what suits your needs.
