Schneider 63A 3P A9S65363 Isolator Switch is an option among isolator switches at Bashiti Stores, intended for manual control and disconnecting power for isolation purposes according to the circuit diagram. Review the details of this reference when comparing with similar devices, as the function and rating are the basis for choosing the correct replacement.
Practical Benefits
- Provides a clear disconnection and isolation function within the panel layout.
- Helps the isolation point arrangement with maintenance planning and system component handling.
- Compared based on current, number of poles, and voltage rather than just external appearance.
Technical Specifications of this Model
| Brand |
Schneider Electric |
| Series |
Acti9 iSW |
| Model Reference |
A9S65363 |
| Rated Current |
63 A |
| Number of Poles |
3P |
| Rated Operational Voltage |
415VAC |
| Dimensions: W x H x D |
54 x 85 x 73 mm |
| Mounting |
DIN rail |
Who needs this product?
Wiring and maintenance technicians who need a disconnection and isolation point inside an electrical panel. Its selection is coordinated with circuit breakers that provide fault protection, and with the circuit voltage, required current, and number of poles.
Installation and Verification Method — For Specialized Technicians
The following steps illustrate the general workflow. The manufacturer's diagram for reference A9S65363 must be used to determine terminals and connection values. Work must not be performed on a live circuit.
- The technician disconnects all power sources and secures them against accidental restart, then verifies the absence of voltage with an appropriate tool.
- Matches the device reference, number of poles, current, and voltage with the panel diagram, and reviews conductor cross-sections and protection coordination.
- Installs the component on the rail or designated position after confirming compatibility, and identifies the supply and load terminals from the manufacturer's diagram for this reference.
- Performs connections with the tightening torque, stripping length, and wire gauges specified in the model manual; do not carry these values over from a similar device.
- Checks the security of the installation and connections, closes the covers, and performs the required operational and protection tests before handing over the circuit.
Frequently Asked Questions Before Purchasing
Is the isolator switch an automatic circuit breaker?
No. The function of this product is isolation and control, not automatic disconnection for overload or short-circuit. Fault protection is provided by a separate appropriate device.
Is setting the switch to OFF enough to begin maintenance?
All power sources must be isolated, the absence of voltage verified, and isolation locked according to site procedures; the position of the handle alone is not a substitute for verification.
How do I choose the number of poles?
It is determined by the power supply diagram and conductor disconnection requirements, and must be reviewed by the technician responsible for the panel.
Order from Bashiti Stores
Learn more within the Electrical Section and Circuit Breakers. Bashiti Stores — Yousef Bashiti Co., serving individuals, companies, and projects in Jordan. For inquiries about the product and quantities, contact 0795756898 or visit our Bayader and Wahdat branches in Amman.
For comparison within the category
Also check out the Schneider 40A 2P A9S65240 Isolator Switch, and compare the specifications to choose what fits your needs.
