Schneider 63A 2P Isolation Switch A9S65263 is an option among isolation switches at Bashiti Stores, intended for manual control and disconnecting power for isolation purposes according to the circuit diagram. Review the details of this reference when comparing with similar devices, as functionality and rating are the basis for choosing the correct replacement.
Practical Benefits
- Provides a clear disconnection and isolation function within the panel layout.
- The isolation point arrangement assists in planning maintenance and handling system components.
- Comparison is based on current, number of poles, and voltage rather than just outward appearance.
Technical Specifications for this Model
| Brand |
Schneider Electric |
| Series |
Acti9 iSW |
| Model Reference |
A9S65263 |
| Rated Current |
63 A |
| Number of Poles |
2P |
| Rated Operational Voltage |
415VAC |
| Dimensions: W x H x D |
36 x 85 x 73 mm |
| Mounting |
DIN Rail |
Who needs this product?
Wiring and maintenance technicians who require a disconnection and isolation point within an electrical panel. Its selection is coordinated with circuit breakers that provide fault protection, as well as the circuit voltage, required current, and number of poles.
Installation and Verification Method — For Professional Technicians
The following steps outline the general workflow; the manufacturer's diagram for reference A9S65263 must be used to identify terminals and torque values. Do not perform work on a circuit connected to power.
- The technician disconnects all power sources, secures them against reactivation, and verifies the absence of voltage with an appropriate tool.
- The device reference, number of poles, current, and voltage are matched with the panel diagram, and conductor cross-sections and protection coordination are reviewed.
- The device is mounted on the rail or its designated position after ensuring compatibility, and the input/output is identified from the manufacturer's diagram for this reference.
- Connections are made using the tightening torque, stripping length, and wire gauges specified in the model manual; do not carry over these values from a similar device.
- Installation and connection tightness are checked, covers are closed, and required operational and protection tests are conducted before handing over the circuit.
FAQs Before Buying
Is the isolation switch an automatic circuit breaker?
No. This product's function is isolation and control, not automatic disconnection of overloads or short circuits. Fault protection is provided by a suitable, separate device.
Is setting the switch to OFF enough to begin maintenance?
All power sources must be isolated, the absence of voltage must be verified, and lockout/tagout procedures must be followed according to site protocols; the position of the lever alone is not a substitute for verification.
How do I choose the number of poles?
It is determined by the power supply diagram and conductor disconnection requirements, and must be reviewed by the technician responsible for the panel.
Order from Bashiti Stores
Learn more in the Electrical Section and Circuit Breakers category. Bashiti Stores — Yousef Bashiti Co., serving individuals, companies, and projects in Jordan. For inquiries about the product and quantities, contact 0795756898 or visit our Bayader and Wehdat branches in Amman.
For comparison within the category
Also check out the Schneider 40A 2P Isolation Switch A9S65240, and compare the specifications to choose what suits your needs.
